Home
About SMML
Subscribe
Archives
Members models
Links
Model reviews
Aftermarket reviews
Book reviews
Articles
Reference
Update

 

USS Wasp - CV-7

By: Falk Pletscher


I scratchbuilt this model back in 1991 using a plan from The Floating Drydock which I scaled down to 1/700. The plan contained the outlines of each deck which I cut from plastic sheet and thus built a framework for the hull by adding vertical supports. I then filled the gaps with body putty and sanded the hull to shape.
The hangar atop the hull and the island are made from plastic sheet, while the deck is made from Evergreen "v-groove" plastic. The crane and the CXAM-1 antenna are from stretched sprue.
The 20mm Oerlikons are scratchbuilt with the shields cut from Evergreen .010 x .060 strip, gun barrels of stretched sprue and ammunition drums of .025 rod.
Aircraft were refined with wheels cut from .035 rod and propellor blades cut from a .010 x .060 strip.
The ladders at each side of the funnel are the only photoetch used.

 


Copyright © SMML 2002